Old spec Tutorial 1 Problem 7 (ENGR5003) - Revisica

Old spec Tutorial 1 Problem 7TutorialOld spec ENGR217Third5 min

ENGR217 (old spec) Thermo L6 Tutorial 1, Problem 7 official answers

If 1 kg of steam has an enthalpy of 3300 kJ and a pressure of 2 MPa, use the steam tables to determine its temperature.

Formulas you may need

Linear interpolation: $\dfrac{y - y_1}{y_2 - y_1} = \dfrac{x - x_1}{x_2 - x_1}$ (learn this, Lecture 9)

T =C

Related questions

Lecture 8 examples - linear interpolation in the saturation table real-gas-steam, steam-tables, interpolation
Lecture 8 example - double interpolation in the superheated table real-gas-steam, steam-tables, interpolation, superheated-steam
Old spec L5 worked example 1 - boiling water at constant pressure real-gas-steam, steam-tables, boundary-work, first-law, closed-vs-open-system
Old spec L5 worked example 2 - heating wet steam in a rigid tank real-gas-steam, steam-tables, rigid-tank, dryness-fraction, interpolation
Old spec L5 worked example 3 - isentropic expansion of dry steam, closed vs open real-gas-steam, steam-tables, isentropic-expansion, closed-vs-open-system, dryness-fraction
Lecture 13 worked example 1 - ideal Rankine cycle gas-turbines, rankine-cycle, steam-tables, t-s-diagram, back-work-ratio, thermal-efficiency
ENGR217 2017 Q B2 real-gas-steam, steady-flow, steam-tables, dryness-fraction, boiler, steam-turbine, sfee
ENGR217 2018 Q A1 real-gas-steam, steady-flow, steam-tables, t-v-diagram, isentropic-expansion, dryness-fraction, closed-vs-open-system